Well, let's start with a 'dumb' for begin.
The idea is that a RGB LED simulate the effect 'Rainbow' as some by themselves (RGB LED vary automatically its color, passing by the colors of the rainbow).
In my case I´m going to use a RGB LED Dealextreme. This 5 Watt-led produces a large amount of light and it is very robust.
As the arduino can not give a very large current for its output, i´ll use a ULN2003 driver to not load too.
This is the assembly:
Start with this blog to share my experiences in electronics, and all the possible information you can provide.
The idea is to post on all my experiences with Arduino developments.
Until now I worked more with PICS, but I discovered the world of Arduino and I have to say that I liked it.
For those who do not know, is an open platform for which you can find plenty of material, both hardware and software.
By the way I'm also fond of buying Dealextreme, and lately has countless gadgets for our developments, and I will be showing.
Gradually things I will be showing on this platform: links, libraries, and all you can.
But hey, less roll and let the subject .....
Adafruit (2) addressable led strip (2) Arduino (11) Arduino Pro Mini (2) Christmas (1) Control Remoto (1) DHT11 (1) DHT22 (1) DS1307 (1) DS3231 (1) FFT (2) led pixel (1) Led strip (2) Lights (5) Microphone (1) MOC3041 (1) MP3 (2) MP3 Player (2) Neopixel (1) Optocouplers (1) Power (1) Remote controller (1) RGB Led (5) SD (2) Triac (1) TSOP1738 (3) ULN2003 (1) vs1002 (2) vs1003 (2) vs1053 (2) WS2811 (3) WS2812 (4) WS2812b (3) Xmas (1)
Arduino Mp3 Payer II (code) > I present this new Arduino project: A full MP3 player based on Arduino . As you can see in...
Kaleidoscope with Arduino and RGB LED strips I present a new Arduino project : a Kaleidoscope (or something similar), with a list o...
Taking advantage of the previous post, we are going to add an IR receiver to the circuit so that we can vary the color and brightness of the...
< Arduino MP3 Player I (circuit) The SD structure In this post I'll try to explain a little the code of our 'Jukebox...
Christmas comes, and nothing more typical than riding a Christmas tree to give a bit of atmosphere. They come in many types, but this is ...
Candle with remote control and Arduino Pro Mini Here I present another project based on a addressable LEDs strip, based on WS...
<< Arduino light organ (I) - Introduction Arduino light organ (III) - Power stage >> Obtaining the signal As ...
Arduino light organ (II) - The circuit >> Introduction Those who have a few years as I, recall that back in the 1980s, in any di...
<< Arduino light organ (II)- The circuit WARNING: In this part is used mains voltage, which can carry risks. If you do not have en...
Well, let's start with a 'dumb' for begin. The idea is that a RGB LED simulate the effect 'Rainbow' as some by thems...
Powered by Blogger.